3-ways compensated flow control valve

This valve enables to keep the flow to constant on port A irrespective of the pressure variations.The excessive flow rate is discharged to port B and can be used as a secondary working port or return port to tank. When the port B is used as a secondary working port the pressure must not exceed the pressure on port A.

New
DATA SHEET

Features

Product code
RFC
Related products

V1126

Load holding
matched diameters, minimal leakage (few drops per minute).
Connections
Connect port P to the pressure supply line and port A to the actuator or to the circuit line where flow regulation is required. Connect port B to the tank or to another actuator. To adjust the flow rate entering through port P, tighten or loosen the adjustment knob.
Material
Body: zinc-plated steel. Internal parts: hardened and ground steel
Seals
BUNA N standard
Download
product data sheet
pdf (119.23 KB)
Ask for information

This field is for validation purposes and should be left unchanged.
Personal data*
Consenso*
Consenso
Sectors
2 way flow compensated control valves with reverse check valve Previous
Next 2 ways steel flower dividers (cartridge version)
Back to FLOW REGULATOR VALVES